Installation

View of meter (cut away) with wire in U-shaped channel.

View of spark plug wire with pickup wire wrapped around 4 times.

Operation

FUNCTION OPERATION
Push and release mode control in order to toggle between Hour Meter, Tachometer, Job Timer and Service Alarm (SVC TIME, SVC SET).

HOUR METER
Indicated by TOT TIME on display (non-resettable, accumulated running hours).

TACHOMETER
Upon entering this function you will see P1, P2, or P3 for 3 seconds on the right hand side of the display. This is the current programmed firing pattern. To access MAXTACH (highest engine RPM) be in the RPM mode and hold mode control down for at least 3 seconds; to erase the high RPM continue holding down for at least 9 seconds (will see 0000). To change the firing pattern, be in the RPM mode and hold mode control down for more than 10 seconds; release mode control on desired firing pattern (P1, P2, or P3).

JOB TIMER
To view the JOB TIME, push and release the mode button until the display reads "JOB TIME". To reset to zero, depress the mode button for 3 seconds (time will clear to 0.0).

SERVICE TIME - This is the time built up since your last maintenance.
To view the Service Time, push and release mode button until the display reads "SVC TIME". When this time exceeds what you set in SVC SET, the display will start flashing (alarming you to perform maintenance). After the maintenance is performed, hold down the mode button for 3 seconds; this will clear the SVC TIME to 0.0 and the alarm will stop flashing. You are now ready to go toward your next maintenance interval.

SERVICE SET - This is where you set the desired maintenance interval.
To view the set maintenance interval, push and release the mode button until the display reads "SVC SET". To set a different service interval, push and hold the mode button until the desired interval appears on the display, then simply release the mode button and that is your new set interval. The mode button must be held down for at least 3 seconds before the service set intervals begin to increment.