MAIN RACING LED VOLT METER HOUR & MAINTENANCE CONTACT US

Series 80x-200 Hour Meters
DC Panel Mount

SenDEC panel mounted, DC input hour meters are self-powered, keeping total run hours displayed at all times. These meters are also available with SenDEC Flash Alert™ that flashes required maintenance at preset intervals. Epoxy encapsulation protects these meters from shock and vibration and seals out the harshest environments. Installation is fast and easy.

On this page: Function Specifications | Environmental Specifications | OEM Options | Dimensioned Drawings | Installation

Custom function programming is available for OEM and high volume accounts with or without special packaging, pad printing, and terminations.

Round

803-200-0111

Mini

804-200-0111

Two-Hole

805-200-0111

All meters available with CHG OIL, LUBE, and other service alerts. Custom flash alerts available for OEMs.

NOTE: Specifications subject to change without prior written notice.

Function Specifications

  • Hour meter records and displays to 9,999.9 hrs
  • Hour glass symbol appears and flashes on/off to indicate counting time
  • Automatic roll over
  • Resolution: 0.1 hour
  • Quartz accuracy: +/- 0.02% (over entire voltage & temperature range)

Flash Alerts

  • Two service alarms with one-time break-in interval
  • Key KancelSM (Flash Alert is latching; reset by using a SenDEC reset wand)
  • "CHG Oil" message
  • "LUBE" message
  • "CHG Muff" message
  • "SVC AIR FILTER" message
  • Two "SVC generic messages
  • Custom messages available for OEMs

Environmental Specifications

  • Operating temperature: -40F to 160F, -40C to 71C
  • Current Consumption: Under 1 mA (for multirange voltages: 1 mA applies to lower voltage)
  • Operating voltage range: 8-32 VDC - (other voltage options available)
  • Protection against: Transient voltage
    Alternator load dump: 150 V
    Inductive switching
    Reverse polarity
  • Shock: SAE J1378 55g's
  • Vibration: SAE J1378 20g's
  • Humidity: SAE J1378 95% RH
  • 100% Epoxy encapsulated
  • LCD digit height: 0.200
  • Case material: ABS, black
  • Weight: 1 oz
  • Standard terminal: 0.250 male blade
  • One year warranty

OEM Options

  • Special spade orientation
  • Various voltage inputs available
  • Polarity protected - use with Packard connector 2973781
  • Record and display to 99,999 hours
  • Resolution: 1 hour
  • Special Flash Alert programming
  • Alarm outputs - audible or visual (external voltage required)
  • Key KancelSM (alarm reset via external key or wand)
  • Custom logos
  • Special bezels
  • Alternator and filtered versions
  • Terminations: stud, wire, screw or blade
  • Packaging: carded, individual box, bulk in trays, poly bagged or special kits

Dimensioned Drawings

All dimensions in inches. To print drawings, right-click on the image and save to your local computer.

Round

Spring clip retainer Fast installation Panel cutout - 2.00 diameter

Mini Rectangular

  • Compact bezel design
  • Spring clip retainer
  • Fast installation
  • Panel cutout - 1.46 x 0.95 opening
  • 2-Hole Dual Mount

  • Above panel cutout - 1.46 x 0.95 opening
  • Behind panel cutout - 1.41 x 0.93 opening
  • Installation

    CAUTION: Only qualified personnel should make electrical connections. Disconnect power prior to working on electrical circuits. Failure to follow normal electrical safety guidelines may result in damage to equipment and/or serious bodily injury.

    NOTE: Retaining clip provided for 803-200 and 804-200 models.

    Back to Hour Meters and Maintenance Monitors page.



    | Home | Contact Us | Privacy Policy | Legal Disclaimer |
    Copyright © 2000 by Digital Instruments Canada Inc. All Rights Reserved..