Series 80x-100 Tachometer/Hour Meters
Inductive Panel Mount

SenDEC inductive panel mount meters include an hour meter for ALL gas engine monitoring, and a tachometer option for single and twin cylinder engines. These meters are also available with the SenDEC Flash Alert™ feature, which flashes the required maintenance at preset intervals. Epoxy encapsulation protects these meters from shock and vibration and seals out the harshest environments. The self-contained power source ensures continuous display of total run hours or RPM. Installation is quick and easy - simply wrap the pickup wire around the spark plug wire.

Custom function programming is available for OEM and high volume accounts with or without special packaging, pad printing, and terminations.

All meters available with CHG OIL, LUBE, and other service alerts. Custom flash alerts available for OEMs.

NOTE: Specifications subject to change without prior written notice.

Function Specifications

Hour Meter

• Records & displays to: 9,999.9 hrs
• Hour glass symbol appears and flashes on/off to indicate counting time
• Automatic roll over
• Resolution: 0.1 hour
• Quartz accuracy: +/- 0.02% (over entire voltage & temperature range)

Tachometer

• Resolution: 10 RPMs
• Maximum RPMs: 7000
• Suitable for most single and twin, 4 cycle gasoline engines operating within specified tachometer firing pattern (except Kohler Command engines using Smart-Spark ignition*)

Flash Alerts

• Two service alarms with one-time break-in interval
• Key KancelSM (Flash Alert is latching; reset by using a SenDEC reset wand)
• "CHG Oil" message
• "LUBE" message
• "CHG Muff" message
• "SVC AIR FILTER" message
• Two "SVC generic messages
• Custom messages available for OEMs

Environmental Specifications

• Operating temperature: -40F to 160F, -40C to 71C
• Shock: SAE J1378 55g's
• Vibration: SAE J1378 20g's
• Humidity: SAE J1378 95% RH
• 100% Epoxy encapsulated
• LCD digit height: 0.200
• Case material: ABS, black
• Weight: 1 oz
• Standard terminal: 0.250 male blade
• One year warranty

OEM Options

• Record and display to 99,999 hours
• Resolution: 1 hour
• Special Flash Alert programming
• Custom logos
• Special bezels
• Terminations: stud, wire, screw or blade
• Packaging: carded, individual box, bulk in trays, poly bagged or special kits

Dimensioned Drawings

All dimensions in inches. To print drawings, right-click the image and save to your local computer.

Round

width="500">

Mini Rectangular

2-Hole Dual Mount

Installation

CAUTION: Only qualified personnel should make electrical connections. Disconnect power prior to working on electrical circuits. Failure to follow standard electrical safety guidelines may result in damage to equipment and/or serious bodily injury.

Strip and attach faston to your pickup wire, connect to meter, then route to plug wire. Wrap pickup wire around spark plug wire 4 to 5 times. Secure with tie wrap.

Note: Retaining clip provided for 803-100 and 804-100 models.

*For all Kohler Command engines using Smart-Spark ignition (all 25 hp Commands and all 22 hp Commands with specification numbers starting at 66500 and 67500)

Back to Hour Meters and Maintenance Monitors page.