Series 806-6xx Vibration
Activated Hour Meters
The new SenDEC 806-6xx Series is the easiest way to
measure the run time of any equipment that vibrates during operation. No wires!
The meter is activated by vibration and accumulates hours as long as the
equipment is vibrating. These meters are also available with SenDEC
Flash Alert™
that flashes required maintenance at preset intervals. The self-contained power
source ensures continuous display of total run hours. Epoxy encapsulation
protects this meter and seals out the harshest environments. Wireless
installation is fast and easy. Operation is fully automatic.
Custom function programming is available for OEM and
high volume accounts with or without special packaging, pad printing, and
terminations.
|
|
Operation
|
Functions
|
Applications
|
|
806-601-1031
|
Records and displays actual engine run time
|
Hour meter
|
For all equipment, including specialized applications
requiring accurate time measurement without available power.
Diesel equipment
Amusement vehicles
Roller coasters
Rental equipment
Construction equipment
Industrial equipment and machinery
Processing equipment
Compressors
Motors
|
|
806-601-1033
|
Fully automatic. Flash Alerts will flash automatically
at factory set intervals.
|
Hour meter with Flash Alerts. Flashes "CHG OIL" at 25
hour intervals with total flash time of 2 hours.
|
|
806-601-3037
|
Hour meter with Flash Alerts. Flashes "CHG OIL" at 199
hour intervals with total flash time of 4 hours.
|
|
806-601-3041
|
Hour meter with Flash Alerts. Flashes "CHG OIL" at 99
Hour intervals with total flash time of 4 hours and flashes "LUBE" at 25 hour
intervals with total flash time of 2 hours.
|
NOTE 1: Specifications subject to change without prior
written notice.
Function Specifications
Hour Meter
-
Records and displays to: 9,999.9 hrs
-
Hour glass symbol appears and flashes on/off to
indicate counting time
-
Automatic roll over
-
Resolution: 0.1 hour
-
Quartz accuracy: +/- 0.02% (over entire voltage &
temperature range)
Flash Alert
-
Flashes "LUBE" and "CHG OIL" at programmed intervals to
remind the operator when service is needed. Actual maintenance intervals may
vary by manufacturer. Refer to your owner's manual for actual recommended
service intervals.
Environmental Specifications
-
Operating temperature: -40F to 160F, -40C to 71C
-
Shock: SAE J1378 55g's
-
Vibration: SAE J1378 20g's
-
Humidity: SAE J1378 95% RH
-
100% Epoxy encapsulated
-
LCD digit height: 0.200
-
Case material: ABS, black
-
Weight: 1 oz
-
One year warranty
OEM Options
-
Key KancelSM (Flash Alert is reset by using a SenDEC
resent wand)
-
Custom Logos
-
Packaging: carded, individual box, bulk in trays,
poly-bagged or special kits
Installation
All dimensions in inches. To print figures individually,
right-click on the image and save to your local computer.
-
Find a convenient mounting location. DO NOT mount over
magnetic surfaces. DO NOT mount meter where surface temperature exceeds 125
degrees F. As a general guideline, if you can place your hand on the mounting
surface without discomfort while equipment is at full operating temperature,
then it's not too hot for the meter.
-
Use drill template (Fig. 1) to locate mounting holes.
CAUTION: DO NOT DRILL INTO GAS TANKS OR ENGINE
CRANKCASE. If in doubt, contact your dealer.
FIG. 1 Back Side of Meter
2.125" L x 1.490" W x 0.550" D
-
Mounting will determine sensitivity of the meter. In
most applications, the appropriate mounting sensitivity can be easily achieved.
See Fig. 2 for mounting sensitivity options.
|
|
|
|
Side view of Vertical
(average sensitivity)
|
Side View of Meter 45 deg
(least sensitivity)
|
Side View of Meter Flat
(most sensitivity)
|
Back to
Hour Meters and Maintenance Monitors page.
MAIN